Mighty Mini Bark Collar

1. Easy to use and test. The new sensor hole activates the collar by more sensitively capturing throat vibration when dog barks. You can test it yourself by simply blowing air into the sensor hole.
2. Trains dog not punishes. Collar emits a warning sound during the first two barks. When barking continues, it emits a combination of Sound + Vibration from the third to seventh bark. The vibration time increases the more successive times the collar is triggered.
3. Auto protect for enhanced safety. Enters into one-minute auto-protection mode after being triggered seven times continuously.
4. Press + - button to adjust the 7 sensitivity levels.
5. You know it's working when the indicator light is on.
6. Enhanced night time safety with a high quality 1.5cm wide Black Polyester Belt with 2 reflective strips.

Sizing of Mighty Mini

• Designed to work best for dogs from 2 to 12kgs.
• Belt is adjustable 15cm to 50cm around the neck.
• Collar receiver is 4cm across, 3cm tall and 2cm thick.
• Weight of collar receiver and belt: 29g

Adjusting Belt

There is a way to adjust the belt even further to fit the smallest of necks. Just remove the buckle and re-thread the belt so the tip of the belt faces outside (not facing inside as it was when unboxed). For a guide on how to do this, please watch this video.

User Manual

Always read the manual fully when purchasing a dog training device. We can only give quick guides, but the manual will list the comprehensive features that we may miss pointing out.

Testing the Mighty Mini

Turn on collar by pressing the power (+) button for a few sections until it beeps and power button light turns green. It may be necessary to charge the unit for a couple of hours after first unboxing.

Adjust sensitivity to highest setting by pressing the plus (+) button multiple times until you can no longer hear a beep. Face the sensor of the collar in front of your mouth and blow air into it. The sensor hole is found in the middle of the contact jaw on the side facing the dog's neck when worn.

Blowing air multiple times into the sensor will help you understand the sequence of the pre-programmed bark correction feature. Note that the collar will shut down for 30 seconds once it has reached the limit and reset.

Conditions for 30-Day Guarantee

Please refrain from cutting belt during the 30 Day Period. Doing so will void the guarantee and the item can only be returned when item is faulty.

Cutting Belt

When you are happy with how the collar fits and performs, cut the belt with sharp scissors. Make sure to burn the ends with a lighter so they don't fray overtime.

Prolonging Life of Mighty Mini

Avoid pressing buttons with sharp fingernails as to not wear out the cover. Keep the box for storage and safe-keeping when not in use. When storing for prolonged periods, charge it to full and don't forget to store it with the charging cable. Avoid leaving the collar plugged in fully charged for long periods of time as doing so will shorten the life of the built-in lithium ion battery. This collar is water resistant so wet weather is not an issue. However, avoid submerging the collar fully in water.